Estimate my rwhp and bhp?
I have a 1999 mustang cobra convertible. It has 15,000 all original miles on it. Before I get a dyno tune I would like a general estimate (rwhp and bhp) for anyone who has experience with similar cars and mods. Here is a list of mods that I have installed:
BBK Longtube Ceramic-coated headers
SLP x-pipe with high flow cats
SLP Loudmouth 2 Catback System w/ shotgun resonators from LM1
GMS Coil Pack Kit
JLT Cold Air Intake (down into fender)
FRPP 3.73 gears (no effect on hp but is a torque multiplier)
Steed tri-ax shifter (no effect on hp, just high rev acceleration)
BBK Twin Blade 65 mm Throttle Body
Hypertech tuned:
Rev limiter removed
Top speed limiter removed
timed for 93 octane only
Only fully synthetic oil used
at least 300 to 330hp nice car
Items Recently Purchased From This Site:
3" PIPE FULL STAINLESS TURBO/CAT/BACK EXHAUST+HEADER+DOWN PIPE UP PIPE TURBOBACK, 2.25"X32" STRAIGHT 1MM THICK EXHAUST/DOWN/DUMP/TUBING/HEADER/CATBACK PIPING PIPE, 2- 2.25"X32" STRAIGHT 1MM EXHAUST/DOWN/DUMP/UP/TUBING/HEADER/CATBACK PIPING PIPE, SINGLE PATH 4.5" TIP CATBACK+DOWN+UP PIPE+HEADER EXHAUST 02-07 IMPREZA WRX/STI, 2- 2.25"X32"STRAIGHT 1MM THICK EXHAUST/DOWN/UP/TUBING/HEADER/CATBACK PIPING PIPE, CIVIC SI EP3 EP FULL STAINLESS EXHAUST COMBO CATBACK HEADER DOWN PIPE CAT BACK, 2.25"X32" 1MM THICK STAINLESS STEEL EXHAUST/DOWN PIPE/TUBING/HEADER/CATBACK PIPE, X2 2.25"X32" 1MM THICK STAINLESS STEEL EXHAUST/DOWN PIPE/TUBING/HEADER/CATBACK E, 2.25"X32" STRAIGHT 1MM THICK EXHAUST/DOWN/UP/TUBING/HEADER/CATBACK PIPING PIPE, HONDA DEL SOL 93-97 EG JDM FULL CATBACK EXHAUST COMBO CATBACK+HEADER+DOWN PIPE , HONDA CIVIC 02-05 SI(EP3) FULL EXHAUST SYSTEM CATBACK+HEADER+DOWN PIPE CAT BACK, SINGLE PATH 4.5" TIP CATBACK+DOWN+UP PIPE+HEADER EXHAUST 02-07 IMPREZA WRX/STI, 2- 2.25"X32"STRAIGHT 1MM THICK EXHAUST/DOWN/UP/TUBING/HEADER/CATBACK PIPING PIPE, 2- 2.25"X32" STRAIGHT 1MM EXHAUST/DOWN/DUMP/UP/TUBING/HEADER/CATBACK PIPING PIPE, 2.25"X32" STRAIGHT 1MM THICK EXHAUST/DOWN/DUMP/TUBING/HEADER/CATBACK PIPING PIPE, 2.25"X32" STRAIGHT 1MM THICK EXHAUST/DOWN/UP/TUBING/HEADER/CATBACK PIPING PIPE, X2 2.25"X32" 1MM THICK STAINLESS STEEL EXHAUST/DOWN PIPE/TUBING/HEADER/CATBACK E, 2.25"X32" 1MM THICK STAINLESS STEEL EXHAUST/DOWN PIPE/TUBING/HEADER/CATBACK PIPE, 54MM ALUMINUM 3-BOLTS GASKET HEADER/EXHAUST/DOWN PIPE CATBACK TEST PIPE CAT JDM, UNIVERSAL 53MM ALUMINUM GASKET FOR HEADER/EXHAUST/DOWN PIPE CATBACK TEST PIPE , WRX/STI SS HEADER+3"TURBO CATBACK+DOWN PIPE+UP-PIPE CAT,
