I am getting ready to replace my standard tub with a Kohler whirlpool tub. The old tub is 60" X 30", the new is 60" X 32". It is in an alcove with concrete block on two sides. My question is, how is the best way to connect the drain kit. The instructions say mount the overflow and the drain assembly to the tub, then set the tub, so the down tube on the tub inserts into the trap in the ground. How can I tighten or adjust the connection after the tub is in. No access due to CBS block walls. There is only one access panel on the tub, but it is on the other end for motor access.
I was thinking maybe installing the drain kit to the trap first, setting the tub, then connecting the overflow and tub drain from inside the tub. Any suggestions?
Your existing trap may not line up with the tub drain, because the new tub is wider than the old tub. You need access from the side of the tub, the rear of the tub, or from underneath to align the drain with the trap and tighten the fitting. Because your tub is heavy and awkward to maneuver, I think it would be nearly impossible to install the drain kit to the trap before setting the tub in place and hope to have the drain and overflow in the right places with reference to the tub.
Prothane Motor Mounts Inserts Polyurethane Black Nissan 200SX NX Sentra Set of 4, Energy Suspension Motor Mounts/Motor Mount Insert 3-1151R, 95-99 Dodge Neon Race Motor Mount Inserts. , 1995-1999 ECLIPSE TALON RED POLYTHANE ENGINE MOTOR MOUNT INSERTS 96 97 98, 1990-1994 ECLIPSE TALON 1G DSM RED POLYTHANE ENGINE MOTOR MOUNT INSERTS, Energy Suspension Polyurethane Engine Motor Mount Inserts 05-07 Scion tC Black, Energy Suspension Polyrethane Engine Motor Mount Inserts Dodge Neon SRT-4 2.4L, Energy Suspension Polyurethane Engine Motor Mount Inserts Acura RSX / Civic Si, Energy Suspension Polyurethane Engine Motor Mount Inserts 92-01 Honda Prelude, Energy Suspension Polyurethane Engine Motor Mount Inserts Beetle Jetta Golf GTI, Prothane Motor Mount Inserts 8-507 Honda Civic, Prothane Motor Mount Inserts 8-508 Honda Civic, Prothane Motor Mount Inserts 8-512 Acura Integra, Prothane Motor Mount Inserts 8-516 Acura Integra, Prothane Motor Mount Inserts 8-502 Acura, Honda, Energy Suspension Motor Mount Insert Kit Inserts Honda Accord 94 96 97 16.1108G , energy suspension Mitubishi motor mount inserts, ENGINE MOTOR MOUNT MAZDA 3 2004-2009 FRONT RIGHT INSERT, Energy Suspension 16.1105G Motor Mount Insert Black 3 Torque Mount Positions, Energy Suspension 5.1107R Motor Mount Insert Red Motor And Transmission Inserts, Energy Suspension 8.1104G Motor Mount Insert Black 3 Torque Mount Positions, Energy Suspension 16.1105R Motor Mount Insert Red 3 Torque Mount Positions, Energy Suspension 16.1106G Motor Mount Insert Black 3 Torque Mount Positions, Energy Suspension Motor Mounts/Motor Mount Insert 3-1102G, Energy Suspension Motor Mounts/Motor Mount Insert 3-1145G, Honda civic motor mount insert 96-00 energy suspension, 92-01 Prelude Energy Suspension Polyurethane Rear Engine Motor Mount Insert only, 98-02 LS1 Camaro Firebird Motor Mount Insert Polyurethane BLACK, Prothane 93-97 Chevy Camaro Pontiac Firebird LT1 350 V8 Motor Mounts Red Kit, PROTHANE MOTOR MOUNT INSERTS ECLIPSE DSM 90-94 BLACK,
