 Edelbrock Performer RPM Nitrous Plate Kit 70063 US $131.90 
|
 Edelbrock Performer RPM Nitrous Plate Kit 70093 US $692.90
|
 Edelbrock Performer Nitrous Plate Kit 70011 US $95.90
|
| Powered by phpBay Pro |
What type of spacer to run on a Dual Plane Intake.?
Alright,,,i have a 350 with a mild cam and a Performer RPM Dual Plane Intake...I have been running Nitrous for the past 2 yearts, I am wanting to know, my setup now is 1/2 spacer on top of intake, then nitrous plate, then carburetor. I have a 1 inch spacer that i had bought..Would there be a difference or would i see a difference if a ran the 1 inch spacer, nitrous plate, and carburetor, instead of using the 1/2 inch spacer. Someone was telling me running a 1 inch spacer will help the atomization of the nitrous work better, since i am runnig a dual plane intake. Its a Sniper Nitrous System so the nitorus plate is about a 1/2 inch
I'm assuming the 1" spacer is an "open type". Prepare to lose some bottom-end throttle response when you are off the bottle. IMO, your original 1/2" spacer was probably the best compromise between on-and-off the bottle driveability. That one incher may prove to be a slug.......
Items Recently Purchased From This Site:
| Powered by phpBay Pro |
