I just purchased SSI intake with 24lb injectors and Granatelli 90mm mass air calibrated for the injectors and 70mm Throttlebody. The only modifications I have done is installed full length BBK headers. I know the mass air is over kill, but my question is will my car run properly because I cant really afford a smaller mass air atm. I was thinking of buying some coupler reducers so it will connect to my cold air. My cold air has 90mm tube from fender mount to mass air, and 75mm tubing from mass air to throttle body. Should I put it all on or is it over kill? Is mass air too big? I figured this would be the best place to get some advice. Thanks
2" 2.25" INCH BLUE TURBO/INTAKE/INTERCOOLER PIPE SILICONE COUPLER HOSE REDUCER, 2" TO 3" INCH BLUE TURBO/INTAKE/INTERCOOLER PIPE SILICONE COUPLER HOSE REDUCER, 2" 2.25" INCH BLUE TURBO/INTAKE/INTERCOOLER PIPE SILICONE COUPLER HOSE REDUCER, Red 1.5'' to 2.0'' 3-PLY Universal Reducer Silicone Turbo Intake Hose Coupler, Blue 3" To 2.5" 3-PLY 90 Degree Reducer Silicone Turbo Intake Hose Coupler NEW, 3.5"-4" RED TURBO/INTAKE PIPE 3PLY5MM SILICONE COUPLER HOSE REDUCER 89-102MM, 1.25"-1.5" RED TURBO/INTAKE PIPE 3PLY5MM SILICONE COUPLER HOSE REDUCER 32-38MM, Red 2.5'' to 3.0'' 3-PLY Universal Reducer Silicone Turbo Intake Hose Coupler, Universal Blue 1.75'' to 2.50'' 3-PLY Reducer Silicone Turbo Intake Hose Coupler, 3"-3.75" RED TURBO/INTAKE PIPE 3PLY5MM SILICONE COUPLER HOSE REDUCER 76-95MM, 2 X 2.5" 3PLY STRAIGHT TURBO/INTAKE PIPE 63MM SILICONE COUPLER REDUCER HOSES RED, 2"-3" RED TURBO/INTAKE PIPE 3PLY5MM SILICONE COUPLER HOSE REDUCER 51-76MM, 2"-2.5"BLUE TURBO/INTAKE/INTERCOOLER PIPE 3PLY5MM SILICONE COUPLER HOSE REDUCER, 3"-3.25" RED TURBO/INTAKE PIPE 3PLY5MM SILICONE COUPLER HOSE REDUCER 76-83MM, 2.75"-3" RED TURBO/INTAKE PIPE 3PLY5MM SILICONE COUPLER HOSE REDUCER 70-76MM, Universal Blue 3'' to 3.5'' 3-PLY Reducer Silicone Turbo Intake Hose Coupler, Universal Black 3.5'' X 12'' 4-Ply Reducer Silicone Hose Coupler Turbo Intake BK, Universal Black 3.0'' X 12'' 4-Ply Reducer Silicone Hose Coupler Turbo Intake BK, INTAKE BOOT 3" TO 2 1/2" REDUCER 3 to 2.5 inch BLACK RUBBER COUPLER HOSE, INTAKE BOOT 3" TO 2 1/2" REDUCER 3 to 2.5 inch YELLOW RUBBER COUPLER HOSE, INTAKE BOOT 3" TO 2 1/2" REDUCER 3 to 2.5 inch PURPLE RUBBER COUPLER HOSE, INTAKE BOOT 3" TO 2 1/2" REDUCER 3 to 2.5 inch RED RUBBER COUPLER HOSE, 1.25"-1.75" RED TURBO/INTAKE PIPE 3PLY5MM SILICONE COUPLER HOSE REDUCER 32-45MM, 2"-2.25" RED TURBO/INTAKE PIPE 3PLY5MM SILICONE COUPLER HOSE REDUCER 51-57MM, 1.75"-3" RED TURBO/INTAKE PIPE 3PLY5MM SILICONE COUPLER HOSE REDUCER 45-76MM, 1.5"-2" RED TURBO/INTAKE PIPE 3PLY5MM SILICONE COUPLER HOSE REDUCER 38-51MM, 2"-2.5" RED TURBO/INTAKE PIPE 3PLY5MM SILICONE COUPLER HOSE REDUCER 51-63MM, 2.25"-3" RED TURBO/INTAKE PIPE 3PLY5MM SILICONE COUPLER HOSE REDUCER 57-76MM, Universal Blue 2'' to 3'' 3-PLY Reducer Silicone Turbo Intake Hose Coupler, Universal Blue 3.5'' to 4'' 3-PLY Reducer Silicone Turbo Intake Hose Coupler,
