| Powered by phpBay Pro |
oil furnace wont start?
ran out of oil, and I got more a day later. But now when I try to reset it, it wont suck any oil from the tank to my furance?
I tried to bleed it using the bleeder screw, and I tried bleeding the filter and still nothing? I took off the line comming from the tank were it connects to the filter, and I am not getting any oil come out? I am guesing there is some sort of block in the line from the tank to the furance?
I am not sure what type of furance it is? It's in a trailer, and has only the one line from tank to furance?
thanks for help..
edit: I blew out the linet with air, and its free of dirt etc. But I stil don't have any oil comming from the tank up to furance, I just changed the filter also...
Any ideas?
thanks again.
when you bleed the line from the tank you need to get every bit of air out of it i mean all with any air it will not start now if you have fuel coming out between the filter and furnace then replace the line and have the furnace run and bleed that line until the furnace starts when all the air is out but the furnace has to run until all air is out you may have to turn up the thermostat for the furnace run longer in order to get all the air out , now if it won;t start after that my thought that running it out of oil some dirt could have got en got in to and blocked the nozzle ,this will happen when a tank empty
Items Recently Purchased From This Site:
| Powered by phpBay Pro |
