I have an 89 N/A Toyota Supra, and a turbo parts car. all of the parts are already off of the parts car so I couldnt' see how it was set up before and I don't know too much about turboing a car.
the parts i have are
Exhaust Manifold, turbo, wastegate, intercooler, piping, and bov. also, the turbo motor is the same as the non turbo motor, so I should be able to take the oil pan off and swap pans right? since the turbo pan already has the oil lines on it.
Now, how do I run the piping and everything? I don't plan on running any more than stock boost. probably less if I can get a wastegate set to less
From what i understand the piping goes from the intake, to the intercooler. then from the other side of the intercooler to one side of the turbo. and the air filter goes on the other side of the turbo. correct?
putting a turbo on a non turbo designed engine may shorten the life of the engine as it was not designed to take the increased pressures, I think you are correct but to confirm take a look at one in a wrecking yard to see how done.
10X UNIVERSAL 3"-3.5" CNC STAINLESS STEEL T-BOLTS CLAMP TURBO INTERCOOLER PIPING, 1 3/8" Inlet BOV Blow off Turbo Intercooler 3" pipe , 1 3/8" Inlet BOV Blow off DV Turbo Intercooler Charge 2.25" Aluminum Pipe 2 1/4", 2.5" UNIVERSAL FRONT MOUNT TURBO INTERCOOLER ALUMINUM PIPING KIT CHORME , 2 X 3.5"COATED STAINLESS STEEL TURBO/INTERCOOLER/DOWNPIPE/DOWN PIPE V-BAND CLAMP, 2X3 INCH INTERCOOLER PIPE TURBO STRAIGHT SILICONE HOSE, 2.5" BLUE TURBO INTERCOOLER PIPING 3-PLY 3PLY 90 DEGREE SILICONE COUPLER HOSE, OBX INTERCOOLER IC PIPES EVOLUTION EVO X 10 TURBO HARD PIPE, 2.5'' Type S RS Turbo Blow Off Valve Bov Adapter Pipe S Intercooler Turbo Pipe, 2X 2.5"-3"BLUE TURBO/INTAKE/INTERCOOLER PIPE 3 PLY SILICONE COUPLER HOSE REDUCER, CIVIC INTEGRA DEL SOL BOLT-ON TURBO INTERCOOLER PIPING KIT + SSQV BLOW OFF VALVE, 2.5" INTERCOOLER PIPING TYPE RS S TURBO BOV BLOW OFF VALVE ALUMINUM FLANGE PIPE, 3" COATED STAINLESS STEEL TURBO/INTERCOOLER/DOWNPIPE/DOWN PIPE/HOSE V-BAND CLAMP, 3.5" X3.0" Black Turbo Intercooler Piping 4-Ply Straight Silicone Coupler Hose, 6X UNIVERSAL 2.75"-3.25" STAINLESS STEEL T-BOLTS CLAMP TURBO INTERCOOLER PIPING, 3" TURBO FRONT/SIDE MOUNT INTERCOOLER SILVER ALUMINUM 12PC DIY PIPING+HOSE+CLAMP, 3.0" X 3.0" Black Turbo Intercooler Piping 4-Ply Straight Silicone Coupler Hose, 10X UNIVERSAL 2.75"-3.25" STAINLESS STEEL T-BOLTS CLAMP TURBO INTERCOOLER PIPING, 2.5" TURBO INTERCOOLER PIPE INTAKE HOSE T-BOLT CLAMP X8, TURBO INTERCOOLER + PIPING KIT LANCER EVO 4 5 6 4G63 @@, 2.5 Type RS/S BOV Blow off Turbo Intercooler SS Pipe , 30.5x12x3 FMIC 3.0" TURBO INTERCOOLER +Aluminum PIPING KIT +Blue SILICONE HOSES, UNIVERSAL 2.5" PIPING KIT RED+ALUMINUM 25X11.25X3 TURBO FRONT MOUNT INTERCOOLER, UNIVERSAL 2.5" PIPING KIT SLVR+ALUMINUM 25X11.25X3 TURBO FRONT MOUNT INTERCOOLER, WRX/STI TOP MOUNT TURBO TMIC BAR&PLATE ALUMINUM INTERCOOLER+Y PIPE RED SILICONE, 3" SSQV SQV BOV Turbo Intercooler Stainless SS Pipe , UNIVERSAL FRONT MOUNT TURBO INTERCOOLER+BLUE PIPE PIPING KIT FMIC 27"X5.5"X2.5", 3" UNIVERSAL POWER COATED ALL BLACK FRONT MOUNT INTERCOOLER TURBO PIPING KIT , 10X UNIVERSAL 2.25"-2.5" STAINLESS STEEL T-BOLTS CLAMP TURBO INTERCOOLER PIPING, IMPREZA WRX/STI TOP MOUNT TMIC TURBO ALUMINUM INTERCOOLER+Y PIPE BLACK SILICONE,
